.. _linear_model:

=========================
Generalized Linear Models
=========================

.. currentmodule:: sklearn.linear_model

The following are a set of methods intended for regression in which
the target value is expected to be a linear combination of the input
variables. In mathematical notion, if :math:`\hat{y}` is the predicted
value.

.. math::    \hat{y}(w, x) = w_0 + w_1 x_1 + ... + w_p x_p

Across the module, we designate the vector :math:`w = (w_1,
..., w_p)` as ``coef_`` and :math:`w_0` as ``intercept_``.

To perform classification with generalized linear models, see
:ref:`Logistic_regression`.


.. _ordinary_least_squares:

Ordinary Least Squares
=======================

:class:`LinearRegression` fits a linear model with coefficients
:math:`w = (w_1, ..., w_p)` to minimize the residual sum
of squares between the observed responses in the dataset, and the
responses predicted by the linear approximation. Mathematically it
solves a problem of the form:

.. math:: \underset{w}{min\,} {|| X w - y||_2}^2

.. figure:: ../auto_examples/linear_model/images/plot_ols_001.png
   :target: ../auto_examples/linear_model/plot_ols.html
   :align: center
   :scale: 50%

:class:`LinearRegression` will take in its ``fit`` method arrays X, y
and will store the coefficients :math:`w` of the linear model in its
``coef_`` member::

    >>> from sklearn import linear_model
    >>> clf = linear_model.LinearRegression()
    >>> clf.fit ([[0, 0], [1, 1], [2, 2]], [0, 1, 2])
    LinearRegression(copy_X=True, fit_intercept=True, normalize=False)
    >>> clf.coef_
    array([ 0.5,  0.5])

However, coefficient estimates for Ordinary Least Squares rely on the
independence of the model terms. When terms are correlated and the
columns of the design matrix :math:`X` have an approximate linear
dependence, the design matrix becomes close to singular
and as a result, the least-squares estimate becomes highly sensitive
to random errors in the observed response, producing a large
variance. This situation of *multicollinearity* can arise, for
example, when data are collected without an experimental design.

.. topic:: Examples:

   * :ref:`example_linear_model_plot_ols.py`


Ordinary Least Squares Complexity
---------------------------------

This method computes the least squares solution using a singular value
decomposition of X. If X is a matrix of size (n, p) this method has a
cost of :math:`O(n p^2)`, assuming that :math:`n \geq p`.

.. _ridge_regression:

Ridge Regression
================

:class:`Ridge` regression addresses some of the problems of
:ref:`ordinary_least_squares` by imposing a penalty on the size of
coefficients. The ridge coefficients minimize a penalized residual sum
of squares,


.. math::

   \underset{w}{min\,} {{|| X w - y||_2}^2 + \alpha {||w||_2}^2}


Here, :math:`\alpha \geq 0` is a complexity parameter that controls the amount
of shrinkage: the larger the value of :math:`\alpha`, the greater the amount
of shrinkage and thus the coefficients become more robust to collinearity.

.. figure:: ../auto_examples/linear_model/images/plot_ridge_path_001.png
   :target: ../auto_examples/linear_model/plot_ridge_path.html
   :align: center
   :scale: 50%


As with other linear models, :class:`Ridge` will take in its ``fit`` method
arrays X, y and will store the coefficients :math:`w` of the linear model in
its ``coef_`` member::

    >>> from sklearn import linear_model
    >>> clf = linear_model.Ridge (alpha = .5)
    >>> clf.fit ([[0, 0], [0, 0], [1, 1]], [0, .1, 1]) # doctest: +NORMALIZE_WHITESPACE
    Ridge(alpha=0.5, copy_X=True, fit_intercept=True, max_iter=None,
          normalize=False, solver='auto', tol=0.001)
    >>> clf.coef_
    array([ 0.34545455,  0.34545455])
    >>> clf.intercept_ #doctest: +ELLIPSIS
    0.13636...


.. topic:: Examples:

   * :ref:`example_linear_model_plot_ridge_path.py`
   * :ref:`example_document_classification_20newsgroups.py`


Ridge Complexity
----------------

This method has the same order of complexity than an
:ref:`ordinary_least_squares`.

.. FIXME:
.. Not completely true: OLS is solved by an SVD, while Ridge is solved by
.. the method of normal equations (Cholesky), there is a big flop difference
.. between these


Setting the regularization parameter: generalized Cross-Validation
------------------------------------------------------------------

:class:`RidgeCV` implements ridge regression with built-in
cross-validation of the alpha parameter.  The object works in the same way
as GridSearchCV except that it defaults to Generalized Cross-Validation
(GCV), an efficient form of leave-one-out cross-validation::

    >>> from sklearn import linear_model
    >>> clf = linear_model.RidgeCV(alphas=[0.1, 1.0, 10.0])
    >>> clf.fit([[0, 0], [0, 0], [1, 1]], [0, .1, 1])       # doctest: +SKIP
    RidgeCV(alphas=[0.1, 1.0, 10.0], cv=None, fit_intercept=True, scoring=None,
        normalize=False)
    >>> clf.alpha_                                      # doctest: +SKIP
    0.1

.. topic:: References

    * "Notes on Regularized Least Squares", Rifkin & Lippert (`technical report
      <http://cbcl.mit.edu/projects/cbcl/publications/ps/MIT-CSAIL-TR-2007-025.pdf>`_,
      `course slides
      <http://www.mit.edu/~9.520/spring07/Classes/rlsslides.pdf>`_).


.. _lasso:

Lasso
=====

The :class:`Lasso` is a linear model that estimates sparse coefficients.
It is useful in some contexts due to its tendency to prefer solutions
with fewer parameter values, effectively reducing the number of variables
upon which the given solution is dependent. For this reason, the Lasso
and its variants are fundamental to the field of compressed sensing.
Under certain conditions, it can recover the exact set of non-zero
weights (see
:ref:`example_applications_plot_tomography_l1_reconstruction.py`).

Mathematically, it consists of a linear model trained with :math:`\ell_1` prior
as regularizer. The objective function to minimize is:

.. math::  \underset{w}{min\,} { \frac{1}{2n_{samples}} ||X w - y||_2 ^ 2 + \alpha ||w||_1}

The lasso estimate thus solves the minimization of the
least-squares penalty with :math:`\alpha ||w||_1` added, where
:math:`\alpha` is a constant and :math:`||w||_1` is the :math:`\ell_1`-norm of
the parameter vector.

The implementation in the class :class:`Lasso` uses coordinate descent as
the algorithm to fit the coefficients. See :ref:`least_angle_regression`
for another implementation::

    >>> clf = linear_model.Lasso(alpha = 0.1)
    >>> clf.fit([[0, 0], [1, 1]], [0, 1])
    Lasso(alpha=0.1, copy_X=True, fit_intercept=True, max_iter=1000,
       normalize=False, positive=False, precompute='auto', tol=0.0001,
       warm_start=False)
    >>> clf.predict([[1, 1]])
    array([ 0.8])

Also useful for lower-level tasks is the function :func:`lasso_path` that
computes the coefficients along the full path of possible values.

.. topic:: Examples:

  * :ref:`example_linear_model_plot_lasso_and_elasticnet.py`
  * :ref:`example_applications_plot_tomography_l1_reconstruction.py`


.. note:: **Feature selection with Lasso**

      As the Lasso regression yields sparse models, it can
      thus be used to perform feature selection, as detailed in
      :ref:`l1_feature_selection`.

.. note:: **Randomized sparsity**

      For feature selection or sparse recovery, it may be interesting to
      use :ref:`randomized_l1`.


Setting regularization parameter
--------------------------------

The ``alpha`` parameter controls the degree of sparsity of the coefficients
estimated.

Using cross-validation
^^^^^^^^^^^^^^^^^^^^^^^

scikit-learn exposes objects that set the Lasso ``alpha`` parameter by
cross-validation: :class:`LassoCV` and :class:`LassoLarsCV`.
:class:`LassoLarsCV` is based on the :ref:`least_angle_regression` algorithm
explained below.

For high-dimensional datasets with many collinear regressors,
:class:`LassoCV` is most often preferable. How, :class:`LassoLarsCV` has
the advantage of exploring more relevant values of `alpha` parameter, and
if the number of samples is very small compared to the number of
observations, it is often faster than :class:`LassoCV`.

.. |lasso_cv_1| image:: ../auto_examples/linear_model/images/plot_lasso_model_selection_002.png
    :target: ../auto_examples/linear_model/plot_lasso_model_selection.html
    :scale: 48%

.. |lasso_cv_2| image:: ../auto_examples/linear_model/images/plot_lasso_model_selection_003.png
    :target: ../auto_examples/linear_model/plot_lasso_model_selection.html
    :scale: 48%

.. centered:: |lasso_cv_1| |lasso_cv_2|


Information-criteria based model selection
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Alternatively, the estimator :class:`LassoLarsIC` proposes to use the
Akaike information criterion (AIC) and the Bayes Information criterion (BIC).
It is a computationally cheaper alternative to find the optimal value of alpha
as the regularization path is computed only once instead of k+1 times
when using k-fold cross-validation. However, such criteria needs a
proper estimation of the degrees of freedom of the solution, are
derived for large samples (asymptotic results) and assume the model
is correct, i.e. that the data are actually generated by this model.
They also tend to break when the problem is badly conditioned
(more features than samples).

.. figure:: ../auto_examples/linear_model/images/plot_lasso_model_selection_001.png
    :target: ../auto_examples/linear_model/plot_lasso_model_selection.html
    :align: center
    :scale: 50%


.. topic:: Examples:

  * :ref:`example_linear_model_plot_lasso_model_selection.py`


Elastic Net
===========
:class:`ElasticNet` is a linear regression model trained with L1 and L2 prior
as regularizer. This combination allows for learning a sparse model where
few of the weights are non-zero like :class:`Lasso`, while still maintaining
the regularization properties of :class:`Ridge`. We control the convex
combination of L1 and L2 using the ``l1_ratio`` parameter.

Elastic-net is useful when there are multiple features which are
correlated with one another. Lasso is likely to pick one of these
at random, while elastic-net is likely to pick both.

A practical advantage of trading-off between Lasso and Ridge is it allows
Elastic-Net to inherit some of Ridge's stability under rotation.

The objective function to minimize is in this case

.. math::

    \underset{w}{min\,} { \frac{1}{2n_{samples}} ||X w - y||_2 ^ 2 + \alpha \rho ||w||_1 +
    \frac{\alpha(1-\rho)}{2} ||w||_2 ^ 2}


.. figure:: ../auto_examples/linear_model/images/plot_lasso_coordinate_descent_path_001.png
   :target: ../auto_examples/linear_model/plot_lasso_coordinate_descent_path.html
   :align: center
   :scale: 50%

The class :class:`ElasticNetCV` can be used to set the parameters
``alpha`` (:math:`\alpha`) and ``l1_ratio`` (:math:`\rho`) by cross-validation.

.. topic:: Examples:

  * :ref:`example_linear_model_plot_lasso_and_elasticnet.py`
  * :ref:`example_linear_model_plot_lasso_coordinate_descent_path.py`


.. _multi_task_lasso:

Multi-task Lasso
================

The :class:`MultiTaskLasso` is a linear model that estimates sparse
coefficients for multiple regression problems jointly: ``y`` is a 2D array,
of shape (n_samples, n_tasks). The constraint is that the selected
features are the same for all the regression problems, also called tasks.

The following figure compares the location of the non-zeros in W obtained
with a simple Lasso or a MultiTaskLasso. The Lasso estimates yields
scattered non-zeros while the non-zeros of the MultiTaskLasso are full
columns.

.. |multi_task_lasso_1| image:: ../auto_examples/linear_model/images/plot_multi_task_lasso_support_001.png
    :target: ../auto_examples/linear_model/plot_multi_task_lasso_support.html
    :scale: 48%

.. |multi_task_lasso_2| image:: ../auto_examples/linear_model/images/plot_multi_task_lasso_support_002.png
    :target: ../auto_examples/linear_model/plot_multi_task_lasso_support.html
    :scale: 48%

.. centered:: |multi_task_lasso_1| |multi_task_lasso_2|

.. centered:: Fitting a time-series model, imposing that any active feature be active at all times.

.. topic:: Examples:

  * :ref:`example_linear_model_plot_multi_task_lasso_support.py`



Mathematically, it consists of a linear model trained with a mixed
:math:`\ell_1` :math:`\ell_2` prior as regularizer.
The objective function to minimize is:

.. math::  \underset{w}{min\,} { \frac{1}{2n_{samples}} ||X W - Y||_2 ^ 2 + \alpha ||W||_{21}}

where;

.. math:: ||W||_21 = \sum_i \sqrt{\sum_j w_{ij}^2}


The implementation in the class :class:`MultiTaskLasso` uses coordinate descent as
the algorithm to fit the coefficients.

.. _least_angle_regression:

Least Angle Regression
======================

Least-angle regression (LARS) is a regression algorithm for
high-dimensional data, developed by Bradley Efron, Trevor Hastie, Iain
Johnstone and Robert Tibshirani.

The advantages of LARS are:

  - It is numerically efficient in contexts where p >> n (i.e., when the
    number of dimensions is significantly greater than the number of
    points)

  - It is computationally just as fast as forward selection and has
    the same order of complexity as an ordinary least squares.

  - It produces a full piecewise linear solution path, which is
    useful in cross-validation or similar attempts to tune the model.

  - If two variables are almost equally correlated with the response,
    then their coefficients should increase at approximately the same
    rate. The algorithm thus behaves as intuition would expect, and
    also is more stable.

  - It is easily modified to produce solutions for other estimators,
    like the Lasso.

The disadvantages of the LARS method include:

  - Because LARS is based upon an iterative refitting of the
    residuals, it would appear to be especially sensitive to the
    effects of noise. This problem is discussed in detail by Weisberg
    in the discussion section of the Efron et al. (2004) Annals of
    Statistics article.

The LARS model can be used using estimator :class:`Lars`, or its
low-level implementation :func:`lars_path`.


LARS Lasso
==========

:class:`LassoLars` is a lasso model implemented using the LARS
algorithm, and unlike the implementation based on coordinate_descent,
this yields the exact solution, which is piecewise linear as a
function of the norm of its coefficients.

.. figure:: ../auto_examples/linear_model/images/plot_lasso_lars_001.png
   :target: ../auto_examples/linear_model/plot_lasso_lars.html
   :align: center
   :scale: 50%

::

   >>> from sklearn import linear_model
   >>> clf = linear_model.LassoLars(alpha=.1)
   >>> clf.fit([[0, 0], [1, 1]], [0, 1])  # doctest: +ELLIPSIS, +NORMALIZE_WHITESPACE
   LassoLars(alpha=0.1, copy_X=True, eps=..., fit_intercept=True,
        fit_path=True, max_iter=500, normalize=True, precompute='auto',
        verbose=False)
   >>> clf.coef_    # doctest: +ELLIPSIS
   array([ 0.717157...,  0.        ])

.. topic:: Examples:

 * :ref:`example_linear_model_plot_lasso_lars.py`

The Lars algorithm provides the full path of the coefficients along
the regularization parameter almost for free, thus a common operation
consist of retrieving the path with function :func:`lars_path`

Mathematical formulation
------------------------

The algorithm is similar to forward stepwise regression, but instead
of including variables at each step, the estimated parameters are
increased in a direction equiangular to each one's correlations with
the residual.

Instead of giving a vector result, the LARS solution consists of a
curve denoting the solution for each value of the L1 norm of the
parameter vector. The full coefficients path is stored in the array
``coef_path_``, which has size (n_features, max_features+1). The first
column is always zero.

.. topic:: References:

 * Original Algorithm is detailed in the paper `Least Angle Regression
   <http://www-stat.stanford.edu/~hastie/Papers/LARS/LeastAngle_2002.pdf>`_
   by Hastie et al.


.. _omp:

Orthogonal Matching Pursuit (OMP)
=================================
:class:`OrthogonalMatchingPursuit` and :func:`orthogonal_mp` implements the OMP
algorithm for approximating the fit of a linear model with constraints imposed
on the number of non-zero coefficients (ie. the L :sub:`0` pseudo-norm).

Being a forward feature selection method like :ref:`least_angle_regression`,
orthogonal matching pursuit can approximate the optimum solution vector with a
fixed number of non-zero elements:

.. math:: \text{arg\,min\,} ||y - X\gamma||_2^2 \text{ subject to } \
    ||\gamma||_0 \leq n_{nonzero\_coefs}

Alternatively, orthogonal matching pursuit can target a specific error instead
of a specific number of non-zero coefficients. This can be expressed as:

.. math:: \text{arg\,min\,} ||\gamma||_0 \text{ subject to } ||y-X\gamma||_2^2 \
    \leq \text{tol}


OMP is based on a greedy algorithm that includes at each step the atom most
highly correlated with the current residual. It is similar to the simpler
matching pursuit (MP) method, but better in that at each iteration, the
residual is recomputed using an orthogonal projection on the space of the
previously chosen dictionary elements.


.. topic:: Examples:

 * :ref:`example_linear_model_plot_omp.py`

.. topic:: References:

 * http://www.cs.technion.ac.il/~ronrubin/Publications/KSVD-OMP-v2.pdf

 * `Matching pursuits with time-frequency dictionaries
   <http://blanche.polytechnique.fr/~mallat/papiers/MallatPursuit93.pdf>`_,
   S. G. Mallat, Z. Zhang,

Bayesian Regression
===================

Bayesian regression techniques can be used to include regularization
parameters in the estimation procedure: the regularization parameter is
not set in a hard sense but tuned to the data at hand.

This can be done by introducing `uninformative priors
<http://en.wikipedia.org/wiki/Non-informative_prior#Uninformative_priors>`__
over the hyper parameters of the model.
The :math:`\ell_{2}` regularization used in `Ridge Regression`_ is equivalent
to finding a maximum a-postiori solution under a Gaussian prior over the
parameters :math:`w` with precision :math:`\lambda^-1`.  Instead of setting
`\lambda` manually, it is possible to treat it as a random variable to be
estimated from the data.

To obtain a fully probabilistic model, the output :math:`y` is assumed
to be Gaussian distributed around :math:`X w`:

.. math::  p(y|X,w,\alpha) = \mathcal{N}(y|X w,\alpha)

Alpha is again treated as a random variable that is to be estimated from the
data.

The advantages of Bayesian Regression are:

    - It adapts to the data at hand.

    - It can be used to include regularization parameters in the
      estimation procedure.

The disadvantages of Bayesian regression include:

    - Inference of the model can be time consuming.


.. topic:: References

 * A good introduction to Bayesian methods is given in C. Bishop: Pattern
   Recognition and Machine learning

 * Original Algorithm is detailed in the  book `Bayesian learning for neural
   networks` by Radford M. Neal

.. _bayesian_ridge_regression:

Bayesian Ridge Regression
-------------------------

:class:`BayesianRidge` estimates a probabilistic model of the
regression problem as described above.
The prior for the parameter :math:`w` is given by a spherical Gaussian:

.. math:: p(w|\lambda) =
    \mathcal{N}(w|0,\lambda^{-1}\bold{I_{p}})

The priors over :math:`\alpha` and :math:`\lambda` are chosen to be `gamma
distributions <http://en.wikipedia.org/wiki/Gamma_distribution>`__, the
conjugate prior for the precision of the Gaussian.

The resulting model is called *Bayesian Ridge Regression*, and is similar to the
classical :class:`Ridge`.  The parameters :math:`w`, :math:`\alpha` and
:math:`\lambda` are estimated jointly during the fit of the model.  The
remaining hyperparameters are the parameters of the gamma priors over
:math:`\alpha` and :math:`\lambda`.  These are usually chosen to be
*non-informative*.  The parameters are estimated by maximizing the *marginal
log likelihood*.

By default :math:`\alpha_1 = \alpha_2 =  \lambda_1 = \lambda_2 = 1.e^{-6}`.


.. figure:: ../auto_examples/linear_model/images/plot_bayesian_ridge_001.png
   :target: ../auto_examples/linear_model/plot_bayesian_ridge.html
   :align: center
   :scale: 50%


Bayesian Ridge Regression is used for regression::

    >>> from sklearn import linear_model
    >>> X = [[0., 0.], [1., 1.], [2., 2.], [3., 3.]]
    >>> Y = [0., 1., 2., 3.]
    >>> clf = linear_model.BayesianRidge()
    >>> clf.fit(X, Y)
    BayesianRidge(alpha_1=1e-06, alpha_2=1e-06, compute_score=False, copy_X=True,
           fit_intercept=True, lambda_1=1e-06, lambda_2=1e-06, n_iter=300,
           normalize=False, tol=0.001, verbose=False)

After being fitted, the model can then be used to predict new values::

    >>> clf.predict ([[1, 0.]])
    array([ 0.50000013])


The weights :math:`w` of the model can be access::

    >>> clf.coef_
    array([ 0.49999993,  0.49999993])

Due to the Bayesian framework, the weights found are slightly different to the
ones found by :ref:`ordinary_least_squares`. However, Bayesian Ridge Regression
is more robust to ill-posed problem.

.. topic:: Examples:

 * :ref:`example_linear_model_plot_bayesian_ridge.py`

.. topic:: References

  * More details can be found in the article `Bayesian Interpolation
    <http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.27.9072&rep=rep1&type=pdf>`_
    by MacKay, David J. C.



Automatic Relevance Determination - ARD
---------------------------------------

:class:`ARDRegression` is very similar to `Bayesian Ridge Regression`_,
but can lead to sparser weights :math:`w` [1]_ [2]_.
:class:`ARDRegression` poses a different prior over :math:`w`, by dropping the
assumption of the Gaussian being spherical.

Instead, the distribution over :math:`w` is assumed to be an axis-parallel,
elliptical Gaussian distribution.

This means each weight :math:`w_{i}` is drawn from a Gaussian distribution,
centered on zero and with a precision :math:`\lambda_{i}`:

.. math:: p(w|\lambda) = \mathcal{N}(w|0,A^{-1})

with :math:`diag \; (A) = \lambda = \{\lambda_{1},...,\lambda_{p}\}`.

In contrast to `Bayesian Ridge Regression`_, each coordinate of :math:`w_{i}`
has its own standard deviation :math:`\lambda_i`. The prior over all
:math:`\lambda_i` is chosen to be the same gamma distribution given by
hyperparameters :math:`\lambda_1` and :math:`\lambda_2`.

.. figure:: ../auto_examples/linear_model/images/plot_ard_001.png
   :target: ../auto_examples/linear_model/plot_ard.html
   :align: center
   :scale: 50%


.. topic:: Examples:

  * :ref:`example_linear_model_plot_ard.py`

.. topic:: References:

    .. [1] Christopher M. Bishop: Pattern Recognition and Machine Learning, Chapter 7.2.1

    .. [2] David Wipf and Srikantan Nagarajan: `A new view of automatic relevance determination. <http://books.nips.cc/papers/files/nips20/NIPS2007_0976.pdf>`_

.. _Logistic_regression:

Logistic regression
===================

Logistic regression, despite its name, is a linear model for classification
rather than regression. Logistic regression is also known in the literature as
logit regression, maximum-entropy classification (MaxEnt)
or the log-linear classifier. In this model, the probabilities describing the possible outcomes of a single trial are modeled using a `logistic function <http://en.wikipedia.org/wiki/Logistic_function>`_.

The implementation of logistic regression in scikit-learn can be accessed from 
class :class:`LogisticRegression`. This 
implementation can fit a multiclass (one-vs-rest) logistic regression with optional
L2 or L1 regularization. 

As an optimization problem, binary class L2 penalized logistic regression minimizes
the following cost function:

.. math:: \underset{w, c}{min\,} \frac{1}{2}w^T w + C \sum_{i=1}^n \log(\exp(- y_i (X_i^T w + c)) + 1) .

Similarly, L1 regularized logistic regression solves the following optimization problem

.. math:: \underset{w, c}{min\,} \|w\|_1 + C \sum_{i=1}^n \log(\exp(- y_i (X_i^T w + c)) + 1) .

L1 penalization yields sparse predicting weights.
For L1 penalization :func:`sklearn.svm.l1_min_c` allows to calculate
the lower bound for C in order to get a non "null" (all feature weights to
zero) model.

The implementation of Logistic Regression relies on the excellent
`LIBLINEAR library <http://www.csie.ntu.edu.tw/~cjlin/liblinear/>`_,
which is shipped with scikit-learn.


.. topic:: Examples:

  * :ref:`example_linear_model_plot_logistic_l1_l2_sparsity.py`

  * :ref:`example_linear_model_plot_logistic_path.py`

.. note:: **Feature selection with sparse logistic regression**

   A logistic regression with L1 penalty yields sparse models, and can
   thus be used to perform feature selection, as detailed in
   :ref:`l1_feature_selection`.


Stochastic Gradient Descent - SGD
=================================

Stochastic gradient descent is a simple yet very efficient approach
to fit linear models. It is particularly useful when the number of samples
(and the number of features) is very large.
The ``partial_fit`` method allows only/out-of-core learning.

The classes :class:`SGDClassifier` and :class:`SGDRegressor` provide
functionality to fit linear models for classification and regression
using different (convex) loss functions and different penalties.
E.g., with ``loss="log"``, :class:`SGDClassifier`
fits a logistic regression model,
while with ``loss="hinge"`` it fits a linear support vector machine (SVM).

.. topic:: References

 * :ref:`sgd`

Perceptron
==========

The :class:`Perceptron` is another simple algorithm suitable for large scale
learning. By default:

    - It does not require a learning rate.

    - It is not regularized (penalized).

    - It updates its model only on mistakes.

The last characteristic implies that the Perceptron is slightly faster to
train than SGD with the hinge loss and that the resulting models are
sparser.

.. _passive_aggressive:

Passive Aggressive Algorithms
=============================

The passive-aggressive algorithms are a family of algorithms for large-scale
learning. They are similar to the Perceptron in that they do not require a
learning rate. However, contrary to the Perceptron, they include a
regularization parameter ``C``.

For classification, :class:`PassiveAggressiveClassifier` can be used with
``loss='hinge'`` (PA-I) or ``loss='squared_hinge'`` (PA-II).  For regression,
:class:`PassiveAggressiveRegressor` can be used with
``loss='epsilon_insensitive'`` (PA-I) or
``loss='squared_epsilon_insensitive'`` (PA-II).

.. topic:: References:


 * `"Online Passive-Aggressive Algorithms"
   <http://jmlr.csail.mit.edu/papers/volume7/crammer06a/crammer06a.pdf>`_
   K. Crammer, O. Dekel, J. Keshat, S. Shalev-Shwartz, Y. Singer - JMLR 7 (2006)

Robustness to outliers: RANSAC
==============================

RANSAC (RANdom SAmple Consensus) is an iterative algorithm for the robust
estimation of parameters from a subset of inliers from the complete data set.

It is an iterative method to estimate the parameters of a mathematical model.
RANSAC is a non-deterministic algorithm producing only a reasonable result with
a certain probability, which is dependent on the number of iterations (see
`max_trials` parameter). It is typically used for linear and non-linear
regression problems and is especially popular in the fields of photogrammetric
computer vision.

The algorithm splits the complete input sample data into a set of inliers,
which may be subject to noise, and outliers, which are e.g. caused by erroneous
measurements or invalid hypotheses about the data. The resulting model is then
estimated only from the determined inliers.

.. figure:: ../auto_examples/linear_model/images/plot_ransac_001.png
   :target: ../auto_examples/linear_model/plot_ransac.html
   :align: center
   :scale: 50%

Each iteration performs the following steps:

1. Select ``min_samples`` random samples from the original data and check
   whether the set of data is valid (see ``is_data_valid``).
2. Fit a model to the random subset (``base_estimator.fit``) and check
   whether the estimated model is valid (see ``is_model_valid``).
3. Classify all data as inliers or outliers by calculating the residuals
   to the estimated model (``base_estimator.predict(X) - y``) - all data
   samples with absolute residuals smaller than the ``residual_threshold``
   are considered as inliers.
4. Save fitted model as best model if number of inlier samples is
   maximal. In case the current estimated model has the same number of
   inliers, it is only considered as the best model if it has better score.

These steps are performed either a maximum number of times (``max_trials``) or
until one of the special stop criteria are met (see ``stop_n_inliers`` and
``stop_score``). The final model is estimated using all inlier samples (consensus
set) of the previously determined best model.

The ``is_data_valid`` and ``is_model_valid`` functions allow to identify and reject
degenerate combinations of random sub-samples. If the estimated model is not
needed for identifying degenerate cases, ``is_data_valid`` should be used as it
is called prior to fitting the model and thus leading to better computational
performance.


.. topic:: Examples:

  * :ref:`example_linear_model_plot_ransac.py`

.. topic:: References:

 * http://en.wikipedia.org/wiki/RANSAC
 * `"Random Sample Consensus: A Paradigm for Model Fitting with Applications to
   Image Analysis and Automated Cartography"
   <http://www.cs.columbia.edu/~belhumeur/courses/compPhoto/ransac.pdf>`_
   Martin A. Fischler and Robert C. Bolles - SRI International (1981)
 * `"Performance Evaluation of RANSAC Family"
   <http://www.bmva.org/bmvc/2009/Papers/Paper355/Paper355.pdf>`_
   Sunglok Choi, Taemin Kim and Wonpil Yu - BMVC (2009)


.. _polynomial_regression:

Polynomial regression: extending linear models with basis functions
===================================================================

.. currentmodule:: sklearn.preprocessing

One common pattern within machine learning is to use linear models trained
on nonlinear functions of the data.  This approach maintains the generally
fast performance of linear methods, while allowing them to fit a much wider
range of data.

For example, a simple linear regression can be extended by constructing
**polynomial features** from the coefficients.  In the standard linear
regression case, you might have a model that looks like this for
two-dimensional data:

.. math::    \hat{y}(w, x) = w_0 + w_1 x_1 + w_2 x_2

If we want to fit a paraboloid to the data instead of a plane, we can combine
the features in second-order polynomials, so that the model looks like this:

.. math::    \hat{y}(w, x) = w_0 + w_1 x_1 + w_2 x_2 + w_3 x_1 x_2 + w_4 x_1^2 + w_5 x_2^2

The (sometimes surprising) observation is that this is *still a linear model*:
to see this, imagine creating a new variable

.. math::  z = [x_1, x_2, x_1 x_2, x_1^2, x_2^2]

With this re-labeling of the data, our problem can be written

.. math::    \hat{y}(w, x) = w_0 + w_1 z_1 + w_2 z_2 + w_3 z_3 + w_4 z_4 + w_5 z_5

We see that the resulting *polynomial regression* is in the same class of
linear models we'd considered above (i.e. the model is linear in :math:`w`)
and can be solved by the same techniques.  By considering linear fits within
a higher-dimensional space built with these basis functions, the model has the
flexibility to fit a much broader range of data.

Here is an example of applying this idea to one-dimensional data, using
polynomial features of varying degrees:

.. figure:: ../auto_examples/linear_model/images/plot_polynomial_interpolation_001.png
   :target: ../auto_examples/linear_model/plot_polynomial_interpolation.html
   :align: center
   :scale: 50%

This figure is created using the :class:`PolynomialFeatures` preprocessor.
This preprocessor transforms an input data matrix into a new data matrix
of a given degree.  It can be used as follows::

    >>> from sklearn.preprocessing import PolynomialFeatures
    >>> import numpy as np
    >>> X = np.arange(6).reshape(3, 2)
    >>> X
    array([[0, 1],
           [2, 3],
           [4, 5]])
    >>> poly = PolynomialFeatures(degree=2)
    >>> poly.fit_transform(X)
    array([[ 1,  0,  1,  0,  0,  1],
           [ 1,  2,  3,  4,  6,  9],
           [ 1,  4,  5, 16, 20, 25]])

The features of ``X`` have been transformed from :math:`[x_1, x_2]` to
:math:`[1, x_1, x_2, x_1^2, x_1 x_2, x_2^2]`, and can now be used within
any linear model.

This sort of preprocessing can be streamlined with the
:ref:`Pipeline <pipeline>` tools. A single object representing a simple
polynomial regression can be created and used as follows::

    >>> from sklearn.preprocessing import PolynomialFeatures
    >>> from sklearn.linear_model import LinearRegression
    >>> from sklearn.pipeline import Pipeline
    >>> model = Pipeline([('poly', PolynomialFeatures(degree=3)),
    ...                   ('linear', LinearRegression(fit_intercept=False))])
    >>> # fit to an order-3 polynomial data
    >>> x = np.arange(5)
    >>> y = 3 - 2 * x + x ** 2 - x ** 3
    >>> model = model.fit(x[:, np.newaxis], y)
    >>> model.named_steps['linear'].coef_
    array([ 3., -2.,  1., -1.])

The linear model trained on polynomial features is able to exactly recover
the input polynomial coefficients.

In some cases it's not necessary to include higher powers of any single feature,
but only the so-called *interaction features*
that multiply together at most :math:`d` distinct features.
These can be gotten from :class:`PolynomialFeatures` with the setting
``interaction_only=True``.

For example, when dealing with boolean features,
:math:`x_i^n = x_i` for all :math:`n` and is therefore useless;
but :math:`x_i x_j` represents the conjunction of two booleans.
This way, we can solve the XOR problem with a linear classifier::

    >>> from sklearn.linear_model import Perceptron
    >>> from sklearn.preprocessing import PolynomialFeatures
    >>> X = np.array([[0, 0], [0, 1], [1, 0], [1, 1]])
    >>> y = X[:, 0] ^ X[:, 1]
    >>> X = PolynomialFeatures(interaction_only=True).fit_transform(X)
    >>> X
    array([[1, 0, 0, 0],
           [1, 0, 1, 0],
           [1, 1, 0, 0],
           [1, 1, 1, 1]])
    >>> clf = Perceptron(fit_intercept=False, n_iter=10).fit(X, y)
    >>> clf.score(X, y)
    1.0